Selecting the input mode
You can select the type of audio input signals of the selected input source according to your preference or the conditions of the input source. This function is available for TV/STB, DVD, and AUX.
y
We recommend setting the input mode to AUTO in most cases.
AV TV
STB VCR DVD AUX
TV
INPUT1 INPUT2 MACRO
TV
AUTO
VOL MODE SETUP INPUTMODE SLEEP
5BEAM ST+3BEAM 3BEAM
1 | 2 | 3 |
STEREO | MY BEAM | MY SUR. |
4 | 5 | 6 |
7 | 8 | 9 |
|
| SUR. DECODE |
0 | +10 |
|
CH LEVEL |
| MENU |
| ENTER | TV/AV |
| YSP | |
|
| |
TEST |
| RETURN |
3Press INPUTMODE repeatedly to toggle between input modes.
INPUTMODE
DVD | AUTO | TV/STB | AUTO |
DVD | DTS | TV/STB | DTS |
When DVD is selected | TV/STB | ANALOG | |
as the input source
When TV or STB is selected as the input source
AUX AUTO
AUX DTS
1Set the operation mode selector to YSP.
TV/AV
YSP
2Press one of the input selector buttons to select the desired input source.
STB VCR DVD AUX
TV
When AUX is selected as the input source
Note
ANALOG is not available as the input mode of DVD and AUX.
• AUTO
Automatically selects audio input signals in the following priority order:
1)Dolby Digital or DTS
2)PCM
3)Analog
y
Use this input mode in most cases.
• DTS
Selects only digital signals encoded in DTS. Compared to AUTO, this input mode provides greater stability while playing back CDs or LDs encoded in DTS.
• ANALOG
Selects only analog signals.
Even when both digital and analog signals are input simultaneously, only analog signals are selected.
y
You can adjust the default input mode to be selected when the power of this unit is turned on by adjusting INPUT MODE in INPUT MENU (see page 64).