Yamaha YSP-500 Using this manual, 5 En

Using this manual

Notes

•This manual describes how to connect and operate this unit. For details regarding the operation of external components, refer to the supplied owner’s manual for each component.

•Operations in this manual use keys on the supplied remote control of this unit unless otherwise specified.

•yindicates a tip for your operation.

•This manual is printed prior to production. Designs and specifications are subject to change in part as a result of improvements, etc. In case of differences between the manual and the product, the product has priority.

1Install this unit in your listening room.

See “Installation” on page 13.

2Connect this unit to your TV and other external components.

See “Connections” on page 16.

3Prepare the remote control and turn on the power of this unit.

See “Getting started” on page 26.

4Run AUTO SETUP.

See “AUTO SETUP (IntelliBeam)” on page 31.

5Play back a source.

See “Playback” on page 41.

6Change the beam modes.

See “Enjoying surround sound” on page 44.

If you want to make additional settings and adjustments

7Run MANUAL SETUP to fine-tune settings and/or set remote control codes.

See “MANUAL SETUP” on page 56 and “Remote control features” on page 79.

INTRODUCTION

English

5 En

Contents

Page Caution: Read this before operating this unit i En Contents 1 En Overview 2 En Features 3 En 4 En Using this manual 5 En Supplied accessories 6 En Controls and functions Front panel 7 En Front panel display 8 En Rear panel 9 En Remote control 10 En 11 En 12 En Installation Before installing this unit Installing this unit 13 En 14 En 15 En Connections 16 En 17 En Connecting a TV 18 En Connecting a DVD player/recorder 19 En Connecting a digital satellite tuner or a cable TV tuner 20 En Connecting a digital airwave tuner 21 En Connecting a VCR 22 En Connecting other external components 23 En Connecting a subwoofer 24 En Connecting the AC power supply cable 25 En Getting started Installing batteries in the remote control Operation range of the remote control 26 En Turning on this unit or setting it to the standby mode 27 En Using SET MENU Displaying the OSD (on-screendisplay) YSP-500 28 En The flow chart of SET MENU 29 En Changing OSD language SET MENU ;LANGUAGE SETUP 30 En AUTO SETUP (IntelliBeam) The flow chart of AUTO SETUP 31 En Installing the IntelliBeam microphone 32 En Using AUTO SETUP (IntelliBeam) 33 En ;AUTO SETUP 34 En AUTO SETUP AUTO SETUP START 35 En SHOW RESULT Page Using the system memory memory Saving settings 2)MEMORY SAVE 38 En ;MEMORY 39 En 1)MEMORY LOAD Playback Selecting the input source 41 En Playing back sources 42 En Adjusting the volume 43 En Enjoying surround sound 5 Beam 44 En Stereo plus 3 Beam My Surround 3 Beam 45 En 46 En Enjoying 2-channelsources in surround sound Neo:6 Cinema Neo:6 Music PRO LOGIC 48 En Adjusting surround mode parameters 49 En Enjoying stereo sound 50 En Playing back sound clearly (My Beam) Using auto-adjustfunction 51 En Using manual-adjustfunction 52 En Using the volume mode (Night listening enhancer/TV volume equal mode) NIGHT:CINEMA NIGHT:MUSIC TV EQUAL VOL Using the sleep timer SLEEP 120min SLEEP 90min SLEEP 60min SLEEP 30min 55 En MANUAL SETUP 56 En Using MANUAL SETUP ;MANUAL SETUP 57 En BEAM MENU 2)BEAM MENU A)SETTING PARAMETERS 1/3 58 En B)BEAM ADJUSTMENT a)HORIZONTAL ANGLE 1/5 59 En b)BEAM TRAVEL LENGTH c)FOCAL LENGTH 60 En d)TREBLE GAIN C)IMAGE LOCATION 61 En SOUND MENU 1)SOUND MENU A)TONE CONTROL C)MUTE LEVEL 62 En D)AUDIO DELAY E)DD/DTS Dynamic Range F)TruBass 63 En INPUT MENU 3)INPUT MENU A)INPUT MODE B)INPUT TRIM 64 En C)INPUT RENAME 65 En DISPLAY MENU 4)DISPLAY MENU A)F.DISPLAY SET B)OSD SET C)UNIT SET 66 En Adjusting the audio balance Using the test tone TEST FRONT L TEST CENTER TEST FRONT R Using the audio output being played back FRONT L +1.0dB CENTER -2.5dB FRONT R +1.0dB SUR.R +2.0dB 69 En Selecting the input mode 70 En Adjusting the system parameters Using the system parameters 71 En 72 En Setting the MAX VOLUME Setting the TURN ON VOLUME 73 En Setting the DEMO MODE 74 En 75 En Disabling the front panel keys 76 En Setting the FACTORY PRESET 77 En 78 En Remote control features Setting remote control codes 79 En Controlling other components 80 En 81 En 82 En Using the TV macro 83 En 84 En Troubleshooting 85 En 86 En 87 En Glossary 88 En 89 En Index 90 En Specifications 91 En 92 En List of remote control codes Page QUICK REFERENCE GUIDE Items used for connections and operations in this guide Connecting external components such as a TV or DVD player to this unit You can enjoy the 6Set the operation mode selector to YSP This unit switches to the YSP operation mode 10Press ENTER to start the AUTO SETUP procedure, and then leave the room within 10 seconds