sAudio pin cable (x1)
s OSD* video pin cable (x1) s Optical cable (x1)
s Digital audio pin cable (x1) s IntelliBeam microphone (x1)
s Cardboard microphone stand (x1) s Demonstration DVD (x1)
*OSD:
2 | Connecting external components to this unit |
Connect your TV or DVD player to this unit using appropriate cables as shown below. After all connections are complete, plug the power supply cable into the AC wall outlet.
For further information on connecting other components, see pages 16 to 24 in the Owner’s Manual.
This connection example shows a way to connect external components such as a TV or DVD player to this unit by using the supplied cable. You can enjoy the
This quick reference guide explains steps to connect a TV and a DVD player to this unit and achieve the surround sound effects in a quick, easy manner. For detailed operation, refer to the Owner’s Manual.
1 | Installing this unit |
TV
Install this unit where there are no objects such as furniture obstructing the path of sound beams. Otherwise, the desired surround sound effects may not be achieved. You may install this unit in parallel with the wall or in the corner.
| Install this unit in the exact center of the wall when it is | Install this unit in the corner at a 40˚ to 50˚ angle from the |
| measured from the left and right corners. | adjacent walls. |
An object, such as furniture | An object, such as furniture |
|
Front left channel | 40˚ to 50˚ | Front left channel |
| ||
Center channel |
| Center channel |
Front right channel |
| Front right channel |
Surround left channel |
| Surround left channel |
Surround right channel |
| Surround right channel |
Depending on your installation environment, connections with external components (see “2 Connecting external components to this unit”) can be done before installing this unit. We recommend that you temporarily place and arrange all components in order to decide which procedure must come first.
For further information on installation, see page 13 in the Owner’s Manual.
The following is an example of installing this unit in a rack.
L1
R2
1
1. Pull out the cap
2. Check the direction
2 | 3 | 4 |
Optical cable
Pull out the cap before connecting the optical cable, and then check the direction to insert the cable.
Note
Check whether the digital audio output of your TV and DVD player is turned on.L
R
VCR TV/STB | SUBWOOFER VIDEO | TV/STB AUX | DVD | SYSTEM |
|
| OPTICAL | COAXIAL CONNECTOR | |
AUDIO INPUT | OUT | DIGITAL INPUT |
| |
| 1 Place this unit in front of | 2 Connect this unit | 3 Install this unit in the | 4 Installation is completed. | ||||||||||||||||||||||||
| the rack. | to your TV and DVD player. | rack. |
|
|
|
|
|
|
| ||||||||||||||||||
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
yHint
To enjoy better surround effects, place this unit on the upper shelf to keep it away from the floor.
Note
Be careful not to leave scratches on this unit or the rack.L
VCR TV/STB SUBWOOFER VIDEO
AUDIO INPUT | OUT |
|
|
| If a subwoofer is connected to this unit, turn on the power of your |
|
|
| subwoofer and then carry out the AUTO SETUP procedure (see the |
TV/STB AUX | DVD | SYSTEM | backside) or select “SWFR” for “BASS OUT” in “SUBWOOFER SET” (see |
| |||
OPTICAL | COAXIAL | CONNECTOR | page 62 in the Owner’s Manual). |
|
DIGITAL INPUT
System connectionAudio connectionSubwoofer
Do not plug the power supply cable into an AC wall outlet until all connections are complete.
| If you have connected external components, |
|
| follow the steps on the backside to start the | Continued |
| AUTO SETUP procedure. | on the back |
|
|
Printed in Malaysia | WM28850 [En] | C2007 |
| All rights reserved. |
|