TABLE 17: KEU PHYSICAL DATA
Component | Description |
| Model |
| ||
|
|
|
| |||
060 | 090 | 120 | 180 | |||
|
| |||||
|
|
|
|
|
| |
EVAPORATOR | Centrifugal Blower (Dia. X Wd. in.) | 15 X 15 | 15 X 15 | 15 X 15 | 18 X 18 | |
BLOWER1 |
|
|
|
|
| |
Fan Motor HP (Belt Drive) | 3/4 | 2 | 3 | |||
| Rows Deep | 3 | 3 | 3 | 3 | |
EVAPORATOR | Finned Length (in.) | 30 | 46 | 46 | 54 | |
COIL | Fins per Inch | 13 | 13 | 13 | 13 | |
| Face Area (ft.2) | 5.0 | 8.6 | 10.2 | 12.1 | |
| Rows Deep | 2 | 2 | 2 | 2 | |
| Finned Length (in.) | 30 | 46 | 46 | 54 | |
HOT WATER COIL | Fins Per Inch | 12 | 12 | 12 | 12 | |
Face Area (ft.2) | 3.8 | 5.4 | 5.4 | 9.0 | ||
| ||||||
| Inlet Connection | 1” NPTE | 1” NPTE | 1” NPTE | ||
| Outlet Connection | 1” NPTE | 1” NPTE | 1” NPTE | ||
| Rows Deep | 1 | 1 | 1 | 1 | |
| Finned Length (in.) | 30 | 46 | 46 | 54 | |
STEAM COIL | Fins Per Inch | 8 | 8 | 8 | 8 | |
Face Area (ft.2) | 3.8 | 5.4 | 5.4 | 9.0 | ||
| ||||||
| Inlet Connection | |||||
| Outlet Connection | |||||
| Quantity Per Unit (16” X 25” X 1”) | 2 | 4 | 4 | 0 | |
AIR FILTERS | Quantity Per Unit (20” X 20” X 1”) | 0 | 0 | 0 | 6 | |
| Total Face Area (ft.2) | 5.6 | 11.1 | 11.1 | 16.7 | |
HOLDING CHARGE | Refrigerant 22 (lbs./oz.) | 0/7 | 0/7 | 0/10 | 0/0 | |
1.Refer to Blower Motor and Drive Data table for additional blower and drive information.
All of these 1750 RPM motors are solid base, 56 frame with 1.15 service factor, inherent protection and permanently lubricated ball bearings.
Unitary Products Group | 15 |
