SHIPMENT CONTENTS
The Command Console shipping box contains the following:
•The Command Console Unit
•Video Signal Cable
•AC/DC Power Supply Brick with attached DC cable
•AC Power Cable
•Setup Diskette
•User Manual
Remember to save your original shipping container and packing material to transport or ship the Command Console.
USER MANUAL
The User Manual comes in two formats: printed hardcopy or CD- ROM. This Manual is also available on the Z Microsystems website (www.zmicro.com).
We recommend you read this manual as follows:
Carefully follow the instructions in the Installation and Testing chapter for hookup and initial control settings. Refer to the Operation chapter for a complete description of all the user controls, and the Maintenance and Troubleshooting chapters for care and correcting any unforeseen problems with the system. The Appendices and References chapters are provided for quickly finding technical information about the Command Console.
SYSTEM REQUIREMENTS
The Command Console works with any computer system that provides industry standard screen formats from 640 x 480 to 1280 x 1024, with up to 75 Hz vertical sync. See the Specifica- tions Table of this Manual for a complete listing of all resolutions supported.
The Command Console requires a computer with a suitable onboard subsystems for Video Adapter Card that can support XGA 1024 x 768, SVGA 800 x 600, or VGA 640 x 480 at 60 Hz
4
Doc#
