Z C G H L 5 5 X
If the ignition system doesn't work there may be a fault with the e ectrical supply. First, check the socket by trying out another piece of e ectrical equipment in it , if that works correctly renew the fuse in the p ug.
If the fuse keeps failing there is a fault in the appliance which must be put right. Do not use a fuse with a rating higher than 3 amps. Do not carry out other electrical work. Unplug the appliance and tell your installer.
Replacing the oven light bulb
You need a 25 Watt small Edison screw with a temperature rating of T300.
Make sure the appliance is cool before you replace a bulb. Unplug the appliance.
Open the oven door and remove the oven shelves.
Pull the glass bulb cover towards you and then pull it off. Unscrew the bulb by turning it to the left.
Fit a new bulb and then replace the glass bulb cover.
lReplace the oven shelves
Plug the appliance back into the electricity supply.
The oven light bulb is not covered by the manufacturers guarantee.
General information
35
