Zanussi ZCGHL55X Cleaning between the outer and inner glass doors, To remove the outer glass

Models: ZCGHL55X

1 52
Download 52 pages 40.46 Kb
Page 31
Image 31
Cleaning between the outer and inner glass doors

Z C G H L 5 5 X

Cleaning between the outer and inner glass doors

You can remove the glass from both oven doors if you need to.

Note: For top oven door it is important not to open the door when the glass is removed because the door is lighter and it will spring shut.

To remove the outer glass

1Open the oven door so you can get at the two cross head screws on the top of the oven door.

Note: Open top oven door slightly to access screws.

2Loosen these two screws using a pozidrive screwdriver .

3You should hold the door glass securely in place with one hand, whilst removing the screws completely, with the other hand. If you do not do this, the door glass could fall forward.

4Using both hands, gently tilt the top of the door glass towards you. Lift it slightly to disengage the locators at the bottom of the door.

5Clean the outer and inner glass using hot soapy water and mild abrasives such as 'Cif'. DO NOT try to clean the foil which is inside the door. The foil is there to help keep the door cool, if it is damaged it will not work.

6Replace the glass by holding it in both hands and gently placing the locators into the holes of the brackets at the bottom of the door. Push the top of the glass towards the oven door, and make sure the screw location holes line up.

7Hold the glass in place with one hand and replace the cross head screws into the location holes, with the other hand. Give the screws one turn to make sure the glass is held in place.

8Tighten the screws using a pozidrive screwdriver. Close the door.

Care and cleaning

31

Page 31
Image 31
Zanussi ZCGHL55X Cleaning between the outer and inner glass doors, To remove the outer glass, Care and cleaning, Z C G H L