Zanussi ZKT 662 LN Boost facility, Selecting the boost facility, Power level

Boost facility

This facility provides an initial heat boost to the cooking zone, before its resets to the lower power level selec- ted. The length of the heat boost is dependent on the power level selected as shown in the table below.

Selecting the boost facility

1.Press the cooking zone control (2) of the required

cooking zone.

2. Using the increase control (5), select a power le- vel between 1--8. You have 10 seconds in which to select the correct power level.

After 5 seconds, «A» appears in the power level. The boost facility has been activated.

The cooking zone will now heat up at power level 9, and, after the defined time (see Table 1), will switch down to the selected power level.

Example: You select power level 6. After 5 seconds, the boost function switches on. With this setting, the cooking zone will heat up for 2.5 minutes at power level 9, and will then switch down to power level 6.

The automatic heat--up function will not be activated if you:

=> select a power level using the Minus key (4) => select power level 9

Table 1

Power level	Automatic Heat--up function
	time in minutes
1	1
2	3
3	4,8
4	6,5
5	8,5
6	2,5
7	3,5
8	4,5
9	------

2

156