The Timer Function
This function makes cooking easier for you. You don’t have to remain close to the cooking zone throughout the whole cooking process: the cooking zone will be automatically switched off at the selected time.
When no cooking zone has been programmed, the ti- mer function can be used as an
Switching the Timer function on
1.The desired cooking zone must be activated.
The dot (13) must be lit in the respective cooking zone.
2.Select a power level between
3.Press the Timer key (7).
The timer display (8) now shows «00».
4.Using the increase/decrease controls (5/4), enter the cooking time desired (01 to 99 minutes).
The Timer function starts automatically after a few se- conds.
The control lamp (11) lights up at each cooking zone that has been programmed with the timer.
To enter the cooking time more quickly, hold down either the increase or decrease controls (5/4) respectively.
Changing the set coo- king time
The cooking time can be subsequently changed where necessary:
1.The desired cooking zone must be activated
The dot (13) must be lit in the respective cooking zone.
2.Press the Timer key (7).
3.Using the increase/decrease controls (5/4), select a new cooking time.
To enter the cooking time more quickly, hold down either the increase/decrease controls (5/4) respectively.
Calling up the current cooking time
--To call up the programmed cooking time remaining for the respective cooking zone, press the corres- ponding cooking zone key (2).
5
8
11
7
4
13 |
158