Zanussi ZYB992 What to do if…, Installing the door and the glass panels, Problem, Possible cause

3 Close the oven door to	4 Put the door on a soft
the first opening position	cloth on a stable surface.
(halfway). Then pull for-
ward and remove the door
from its seat.
	90°
5 Release the locking	6 Turn the two fasteners
system to remove the pan-	by 90° and remove them
els of glass.	from their seats.

1 2

7Carefully lift (step 1) and remove (step 2) the panels of glass one by one. Start from the top panel of glass.

Clean the glass panels with water and soap. Dry the glass panels carefully.

Installing the door and the glass panels

When the cleaning is completed, install the glass panels and the oven door. Do the above steps in the opposite se- quence.

Make sure that you put the	Make sure that you install
glass panels back in the	the top panel of glass in
correct sequence.	the seats correctly.

The middle panels have a decorative frame. When you in- stall the middle panels, make sure that the screen-printing zone looks to the inner side of the door. Make sure that after the installation the surface of the glass panel frame on the screen-printing zones is not rough when you touch it.

What to do if…

Warning! Refer to "Safety information" chapter.

Problem

The appliance does not heat up.

Possible cause

The appliance is deactivated.

Remedy

Activate the appliance.

17