Getting Ready to Print

Loading the Media

You can operate this printer in three different modes: tear-off, peel-off, or with a cutter.

nTear-off mode allows you to tear off each label (or a strip of labels) after it is printed.

nIn peel-off mode, the backing material is peeled away from the label as it is printed. After this label is removed, the next one is printed.

nIn cutter mode, the printer automatically cuts the label after it is printed.

Tear-Off Mode

1.Unlatch the top cover by pulling the two green release levers toward you (refer to Figure 3). Then, lift the top cover to expose the media compartment.

Release

Lever

Release

Lever

Figure 3

5