Replacing the Printhead
Removing the Printhead
1.Turn printer power off and unplug the printer.
2.Refer to Figure 25. Remove the four screws that secure the printhead and latch assembly to the top cover.
3.Refer to Figure 26. Slide the tension bar all the way to the right in its mounting bracket (1). Then, while gently pressing on the opposite mounting bracket (2), lift and remove the tension bar (3).
4.Refer to Figure 27. Remove both printhead wire harness connectors from their receptacles.
5.Refer to Figure 27. Remove the two screws and washers that secure the printhead to the printhead bracket. Then, lift the lip on the front of the printhead bracket to remove the printhead.
Printhead and Latch Assembly
Top Cover
Screws (4)
Figure 25
36