4.Refer to Figure 17. Thread the media through the media guides.
NOTE: If the media guides must be changed to accommodate the width of the media, turn the green media guide adjuster (refer to Figure 17). The media guides should just touch, but not restrict, the edges of the media.
5.Refer to Figure 17. Thread the media through the cutter unit.
6.Close the top cover and turn on the printer or press the feed button if the printer is already on (see “Auto Calibration” on page 18 for more information).
Media | Wide Media | |
Narrow Media | ||
Guides | ||
|
Media Guide Adjuster
Figure 17
16