Operator Controls

Refer to Figure 19.

Power Switch

nPress to turn on and turn off the printer.

CAUTION: The power should be turned off before connecting or disconnecting the communications and power cables.

Feed Button

nForces the printer to feed one blank label.

nTakes the printer out of a “pause” condition. (The printer is put into “pause” by either a ZPL II command or an error condition.) See “What the Status LED is Telling You” on page 25.

nUsed for printer setup and status (see “Feed Button Modes” on page 31).

Status LED

nFunctions as a printer operational indicator (see “What the Status LED is Telling You” on page 25).

Feed

Button

Status

LED

Power

Switch

Figure 19

19