Card
Printer
Solutions
General information
Getting started
Operation
Printing a card
Cleaning
Troubleshooting
Specifications
Appendix A
Appendix B
Appendix C
P420i Plastic Card Printer
B.·MAGNETIC ENCODER CLEANING
There exists two different processes to clean the Magnetic Stripe Encoder.
The first process consists of a standard cleaning of the printer. This cleans the most important parts of the printer; including the Print head, Transport Roller and Magnetic Stripe Encoder (refer to chapter 4 "Cleaning" for more instructions).
The second process consists of a cleaning of the Magnetic Encoder using the Menu Button from the LCD Display.
To access the Magnetic Encoder Cleaning Menu proceed as below:
|
| 1.·Leave power on. |
| ||
|
| 2.·Remove cards from the Card Feeder | |||
|
| 3.·Insert | one | Cleaning Card | |
|
| (provided) through slot on the side of the Card | |||
|
| Cartridge. |
|
| |
|
| 4.·Press the Menu button until the LCD screen | |||
|
| shows CLEANING MENU. |
| ||
|
| 5.·Press the Select button to select. |
| ||
|
| 6.·Press the Menu button again until the LCD | |||
|
| screen shows CLEAN MAG HEAD. |
| ||
|
| 7.·Run this operation by pressing the Select button. | |||
ISO STANDARD ENCODING |
|
| |||
Track # | Field Separator | Track density | Valid Characters | # of characters | |
1 | ^ | 210 BPI* | Alphanumeric | 79‡ | |
|
|
| (ASCII 20~95†) |
| |
2 | = | 75 BPI* | Numeric | 40‡ | |
(ASCII 48~62) | |||||
|
|
|
| ||
|
|
| Numeric |
| |
3 | = | 210 BPI* | (ASCII 48~62) | 107‡ | |
* Bit per inch
† Except the ‘?’ character
‡ Including Start, Stop and LCR characters. Also note that these 3 characters are automatically managed by the magnetic encoder according to the ISO Standard Norms.
NOTE: Refer to the Card Printer Programmer’s Manual for complete programming information.
