the battery pack to be charged. The charge indicator near the cable will either light steadily, or start to blink. On a fully charged battery, the indicator will go out after a few minutes, indicating a fully charged condition.
On batteries in need of charging, the indicator will stop blinking after a period of time determined by the charge level of the battery and then stay lit continuously. This indicates that the charger is now operating in fast charge mode. When the light goes out, the battery has been completely charged.
Maximum charge time for a battery is 180 minutes. Four batteries may be charged at the same time with the UCN72- 4 charger.
Part Number (Country) | Line cord p/n | V.A.C. Setting | |
|
|
| |
TLCMXX03 | 110 | ||
(U.K.) | TLCEBS1310 | 220 | |
|
|
|
|
(Euro) | TLCE12013 | 220 | |
(Aust.) | TLCE15012 | 220 | |
|
|
|
|
Do not charge batteries while printing. Attempting to print while charging batteries with the