Introduction
This manual covers the use of all chargers currently offered by Zebra for use with MP, RP, Encore, Cameo and QL series mobile printers.
MP and RP Series Printers
The MP series (MP5022, MP5030, MP5033 and MP5044) and the RP3 use NiCad batteries, which require periodic “conditioning” to maintain their maximum capacity. The UC and NCxx04 series chargers designed for these batteries are equipped with a "Condition" cycle, which first discharges then charges the battery. It is recommended NiCad battery packs be conditioned once a week.
Cameo and Encore Series
The Encore and Cameo series printers use NiMH (Nickel- Metal Hydride) battery technology. NiMH batteries must be initially “cycled” several times before maximum capacity is realized.
A NiMH battery is” cycled” by fully charging it, then fully discharging it through normal use. This process should be done when the batteries are new.
QL Series
QL series printers use Lithium Ion (LIon) batteries to achieve maximum power output in a minimum volume. LIon batteries don’t need to be conditioned or cycled, however they can only be safely charged in a charger designed for this battery type. Use of an unauthorized charger with a LIon battery could damage a battery beyond use.
Safety Warnings
Avoid accidental short circuiting of any battery. Allowing battery terminals to contact conductive material will create a short circuit which could cause burns and other injuries or could start a fire.
Use of any charger not approved specifically by Zebra for use with its batteries could cause damage to the battery pack or the printer and will void the warranty.