UCN72 Wall Charger
Description
The UCN72 is a wall mounted fast charger with universal 110 to 230,
tional standards. This charger is used with the Encore and Cameo series printers equipped with
NiMH batteries. The UCN72 will charge a battery pack as fast as its charge level will allow, and then switch over to a trickle mode to maintain the charge at its maxi- mum. Refer to the table below for part numbers.
Charging Battery Packs
Plug the UCN72 into the appropriate A.C. wall receptacle, then insert the charge cable into the
battery pack charger jack.
Chargeindicator
The charger LED will indicate the status of the charger as follows:
•A steady light indicates the battery pack is undergoing a fast charge.
•A slow blinking light indicates the charger is in trickle mode. The battery pack is ready for use.
•A rapidly blinking light indicates a problem with the battery pack. The battery may have an internal short, or its charge monitoring circuitry may be malfunctioning. The battery pack
should not be used any further.
Do not attempt to charge batteries with the UCN72
while printing. Attempting to print while charging can result in improperly charged batteries.