NCxx04 Series Quad Charger/Conditioners
Description
NC series Quad Chargers sequentially charge and/or condition up to 4 batteries. Charge time is approximately one hour per battery depending on battery’s state of charge. Condition cycle times vary with both the battery’s state of charge and with each model.
Charging Batteries
Plug the A.C. line of the charger into an A.C. receptacle. For MP series printers, connect batteries by sliding them downward onto battery contact plate as though mounting them on a printer. (See illustration below.)
Other printer series use individual cables to charge the battery packs. Plug the cables into either the charge jack on the battery pack, or, in the case of the RP3 printer, the printer’s charging jack.
Slide Batteries on plates as thoughmountingonaprinter.
Once the batteries are installed or plugged in the charge cycle will automatically begin, start-
ing with the first battery con- nected. It will sequence left to right through each in-
stalled battery in turn. The “Charge” indicator above the battery under charge will light steadily during
charging.
A.C.PowerConnector
Notelocationof
ChargerJackon
Battery.
Communications(COM) Port
LOADING BATTERIES (MP SERIES ONLY)
continuedonnextpage
11UMAN-Charge