Conditioning Battery Packs

In order to extend battery life, battery packs should be conditioned periodically. The NC series Quad Chargers are equipped with a "Condition" mode, which fully discharges a battery pack followed by a full charge cycle. Conditioning NiCad battery packs once a week is recommended for optimum performance of batteries.

ConditionLight:

FLASHING lightindicatespendingoperation. Whenthebatteryisnextinthecharger’s sequence,itwillbeconditioned.

STEADY light indicates conditioning is in progress. Onlyoneconditionlightwillbeon continuouslyatanytime.

ConditionButton

Pressing this switch will start the Condition cycleforthebatterydirectlybelowit. The Condition Light will turn on.

ReadyLight Charging/Conditioningcycleis completedforthisbattery.

ChargeLight:

FLASHING light indicates pendingoperation. Whenthe battery is next in the charger’ssequence,itwillbe charged.

STEADY light indicates battery isbeingcharged. Onlyone chargelightwillbeon continuouslyatanytime.

PowerLight:

STEADY light indicates normaloperation. FLASHING light indicates aproblemwiththe charger.

NCXX04 QUAD CHARGER CONTROL PANEL

Start the condition cycle by pressing the condition button above the battery just connected . Refer to illustration above for details on the NCxx04 control panel

Communications Port

The NCxx04 Quad chargers are equipped with a COM port which allows communication between the charger and a P.C.

UMAN-Charge12