LI72 Wall Charger
Description
The LI72 is a wall mounted fast charger with universal 110 to 230,
tional standards. This charger is used with the QL series printers (QL 220, QL 320, QL 420)
equipped with Lithium Ion (LiIon) batteries. The LI72 will charge a battery pack as fast as its charge level will allow, and then switch over to a maintenance charge to keep the charge at its maximum. Refer to the table below for part numbers.
Charging Battery Packs
Plug the LI72 into the appropriate
A.C. wall receptacle, then insert
the charge cable into the battery pack charger jack.
Chargeindicator
The charger LED will indicate the status of the charger as follows:
•A steady light indicates the battery pack is undergoing a fast charge.
•A slow blinking light indicates the charger is in maintenance mode. The battery pack is ready for use.
• A rapidly blinking light indicates a problem with the battery pack. The battery may have an internal short, or its charge monitoring circuitry may be malfunctioning. The battery pack should not be used any further.