Trickle Chargers
Description
These compact, cost effective chargers are designed to charge individual battery packs. Typical charge time is 12 to
16hours.
Charging Batteries
Plug the charge cable into the battery pack charger jack, and the Charger body into the appropriate A.C. wall recep- tacle. Trickle Chargers will charge the battery overnight, typically in 12 to 16 hours. While they can be used when the printer is running, charging time will be lengthened.
Trickle Charger Models
Part No | V.A.C./Hz (Country) | Batt. Voltage/Model |
AT852 | 110/60 (U.S.) | 7.2 V/ MP503x Series |
AT855 | 110/60 (U.S.) | 6.0 V/ MP502x Series |
|
|
|
AT856 | 110/60 (U.S.) | 12 V/ MP5044 |
|
|
|
220/50 (Euro) | 6/7.2V/MP502x/3x Series | |
|
|
|
220/50 (Euro) | 6/7.2V/Encore, Cameo | |
|
| Series |
220/50 (U.K.) | ||
|
|
|
220/50 (U.K.) | 12V/MP5044 | |
110/60 (U.S.) | 7.2V/Encore, Cameo |
Trickle Chargers do not condition batteries, and thus should not be used as the principal
charger for NiCad battery packs such as used on the MP and RP
series.
ChargerJack