Zebra Technologies R-140 Media Specifications

Media Specifications

Media Specifications			Standard	Smart Media (RFID)
		Tear-off	0.7" (18 mm)
Minimum label length*		Peel-off	0.5" (13 mm)
		Cutter	1.5" (38 mm)
		Rewind	0.25" (6 mm)
Total media width		Minimum	1.57” (40 mm)	3.0” (76 mm)
(label + liner, if any)		Maximum	5.51” (140 mm)	5.51” (140 mm)
Total thickness		Minimum	0.003” (0.076 mm)	0.003” (0.076 mm)
(includes liner, if any)		Maximum	0.012” (0.305 mm)	0.010” (0.254 mm) excluding IC Chip
Cutter maximum full-width			.009" (.23 mm)
media thickness
Roll media core inside diameter			3” (76 mm)	4.0” (102 mm)
Maximum roll diameter			8.0” (203 mm)	6.0” (152 mm)
RFID Tag Types				Phillips I-Code
				Texas Instruments Tag-It
		Minimum	0.079” (2 mm)
		Preferred	0.118” (3 mm)
Inter-label gap
			Maximum inter-label gap =
		Maximum	2 x (label length for which you have
			calibrated the printer + 1”
Maximum internal fanfold media pack size			8.0” x 5.51” x 4.5” (203x140x114 mm)
(label + liner) L x W x H
Ticket/tag sensing notch L x W			0.12" x .25"
			(3 mm) x (6 mm)
Ticket/tag sensing hole diameter			0.125" (3 mm)
Effective leading edge		Vertical	±0.070” (±1.8 mm)
registration accuracy*		Horizontal	±0.070” (±1.8 mm)
	Mark length	Minimum	0.12” (3 mm)
	(measuring
	parallel to	Maximum	0.43” (11 mm)
	label/tag edge)
	Mark width	Minimum	0.43” (11 mm)
Additional	(measuring
	perpendicular to	Maximum	Full media width
specs. for
	label/tag edge
black mark
sensing	Mark location		Marks must be located within .040"
			(1 mm) of the inside media edge.
	Mark density		> 1.0 ODU (Optical Density Unit)
	Maximum density of the back of
	the media on which the black		0.5 ODU
	mark is printed

*Media registration and minimum label length are affected by media type and width, ribbon type, print speed, and printer mode of operation. Performance improves as these factors are optimized. Zebra recommends always qualifying any application with thorough testing.

97 Zebra R-140 User’s Guide