w = Write protect
Default value: 0 (NOT write protected)
Other value: 1 (Write protect)
s = Special mode
Reserved
^RT – Read TagThe format for the ^RT instruction is:
^RT#,b,n,f,r,m,s
where
^RT = Read Tag command
# = Number to be assigned to the Field
Default value: 0
Other Values: 1 to 9999
b = Starting Block Number
Default value: 0
Other values: 1 to n, where n is the maximum number of blocks for the tag
n = Number of blocks to read
Default value: 1
Other values: 2 to n, where n is maximum number of blocks minus starting block number. In other words, if the tag has 8 blocks (starting with block 0) and you’re starting with block 6, n can be 2. This would give you block 6 and block 7 information.
Zebra | 105 |