Press

Display Shows

Action/Explanation

 

 

 

 

You are now back at the first parameter in the configuration

 

 

 

 

sequence.

 

 

 

DARKNESS

NOTE: If you pressed the NEXT/SAVE key but are through

 

 

 

 

programming the printer configuration, you may press

 

 

 

 

the SETUP/EXIT key and continue with the “SAVE

 

 

 

 

SETTINGS” function.

 

 

 

 

 

 

 

 

 

Save Settings Press the RIGHT or LEFT BLACK OVAL key to

 

 

 

 

display other choices.

 

 

 

 

Default: Permanent

 

 

 

 

Selections: Permanent, temporary, cancel, load defaults,

 

 

 

 

load last save.

 

 

 

 

This display appears when you attempt to exit the configuration

 

 

 

 

mode.

 

 

 

 

• Permanent: Permanently saves the changes, even when printer

 

 

 

SAVE SETTINGS

power is turned off.

 

 

 

 

• Temporary: Saves the changes until changed again or until

 

 

 

 

power is turned off.

 

•Cancel: Cancels all changes since you entered the configuration mode except for darkness and tear-off position (if they were changed).

•Load defaults: Loads factory defaults.

NOTE: Loading factory defaults will require calibration.

• Load last save: Loads the values from the last permanent save.

Press the NEXT/SAVE key to activate the displayed choice. PRINTER READY You have exited the configuration and calibration sequence and

are now ready for normal printer operation

68

Zebra R-140 User’s Guide