4.Rotate the platen roller and clean thoroughly with solvent and an applicator.

5.Brush/vacuum any accumulated paper lint and dust away from the rollers.

6.Reload ribbon and/or media, and close and the printhead.

Figure 25

Cleaning the Sensors

The media, ribbon, and label available sensors should be cleaned on a regular basis to ensure proper operation of the printer. To locate these sensors, refer to Figure 25, Figure 6 on page 15, and Figure 7 on page 16. Brush/vacuum any accumulated paper lint and dust off of these sensors.

Zebra R-140 User’s Guide

71