Zebra Technologies R-140 manual 76

Press	Display Shows	Action/Explanation
		Selecting the Display Language Press the RIGHT or LEFT BLACK
		OVAL key to display other choices.
		Default: English
	LANGUAGE	Selections: English, Spanish, French, German, Italian,
		Norwegian, Portuguese, Swedish, Danish,
		Spanish 2, Dutch, Finnish, Custom
		This parameter allows you to change the language used on the
		front panel display.
		RFID Test Press the left oval key to select the QUICK test or the
		right oval key to select the SLOW test.
		NOTE: RFID media must be loaded and the appropriate tag type
		selected (or choose Autodetect) in order to run this test. Only the
		Texas Instruments’ Tag-Itand Philips I•Code RFID tags are
		supported.
	RFID TEST	QUICK - Perfoms the RFID Test and displays either a PASSED! or
		FAILED! result for the entire test. The user is then prompted to
		CONTINUE.
		SLOW - Performs the same RFID Test but displays the status of
		each function tested. There is a one second pause between the
		displaying of the result of the current functions test and the
		beginning of the next function test. If a particular functions
		passes, the user will see an OK! for that function. If a particular
		fuction fails, the user will see a FAILED! for that function and then
		is prompted to CONTINUE.
		Selecting the RFID Tag Type Press the right or left oval key to
		display other choices.
		NOTE: Only the Texas Instruments’ Tag-Itand Philips
	RFID TAG TYPE	Semiconductors’ I•Code RFID tags are supported.
		Default: None Choices: Autodetect, None, Tag-It, ICODE
		This parameter allows you to change the type of RFID tag being
		used. If the user is unsure of the type of tag being used, select
		Autodetect.

RFID ERR STATUS Displays the last RFID error status message received.

You have now completed the entire configuration and calibration sequence. You may either press the NEXT/SAVE key or the SETUP/EXIT key.

Zebra R-140 User’s Guide 67