34Getting Started Before You Begin

Before You Begin

10/100 Internal PS offers many features, but how you access and work with them is dependent on your environment. Before you begin, you need to get information from the 10/100 Internal PS configuration label.

Important • Make sure the printer is turned off (O).

Table 3 shows the minimum label widths needed to print a 10/100 Internal PS configuration label with different DPI printheads.

Table 3 • Label Width

DPI

Inches

MM

 

 

 

600

1.25

31.75

 

 

 

300

2.50

63.50

 

 

 

200

3.69

93.73

 

 

 

To print a network configuration label for the ZM400 or ZM600 with a 10/100 Internal PS, complete these steps:

1.Turn on (I) the printer and let it complete its power-up cycle.

When the POST cycle is complete, press Setup/Exit to enter the Setup Mode.

2.Scroll through the parameters using the Plus (+ key) until you reach List Network.

3.Press Plus (+ key) to print the network configuration label.

14197L-001 Rev. A

ZebraNet® 10/100 Internal Print Server for ZM400 and ZM600 User Guide

04/19/2007