ZebraLink WebView 83

Alert Setup

9.Enter a valid email address to send the alert messages to.

Example • admin@yourcompany.net (The Port field can be ignored for email setup.)

Important • A password is required. If you forget to enter the password, the alerts you just set are deleted.

10.Click Add Alert Message.

To receive email alert, you must give 10/100 Internal PS the IP address of your mail server that is running SMTP.

11.To save current settings, click Save Printer Setting.

12.Enter the password and click Save Current Configuration.

13.You can continue to add more Alerts, if finished:

•From the Printer Home Page, select PrintServer Settings > Network Communications Setup.

•Click SMTP Email Alerts.

•Specify your SMTP server address.

Note • The SMTP Server address might be referred to as Mail Server address.

When these steps are done, you can begin receiving email notification messages.

04/19/2007

ZebraNet® 10/100 Internal Print Server for ZM400 and ZM600 User Guide

14197L-001 Rev. A