Zebra Technologies ZM400TM, ZM600TM If, The, Then, Note •, on page, present, present, Important •, Important •, Important •, A DHCP server is, No DHCP server is, No device filtering

ZebraNet Utilities 97

ZebraNet Alert

ZebraNet Alert Using SNMP

You can send notifications over SNMP only, for use with ZebraNet Alert or a similar network management utility.

To configure the 10/100 Internal PS to send alerts across a TCP/IP Network using ZebraNet Alert, complete these steps:

Important • If you did not install ZebraNet Alert during the ZebraNet Utilities installation, see ZebraNet Utilities on page 49.

1.From the task bar, select Start > Programs > ZebraNet Utilities > ZebraNet View.

2.Select the printer you want.

If...	Then...
A DHCP server is	The 10/100 Internal PS will already have an IP address.
present
No DHCP server is	You may need to assign the printer an IP address.
present

3.To assign your printer an IP address, from the menu bar, select Print Server > Configuration.

4.For PrintServer SNMP Traps, select the SNMP Traps tab.5.Enter the trap destination and options.

This tells the 10/100 Internal PS what TCP/IP address to send the alerts to, and under what circumstances to send error and log reports. Entering 255.255.255.255 broadcasts the message to every host on the network with an SNMP program running.

6.For ZebraNet Alert to get and display the messages, you need to open ZebraNet Alert. To do this, follow these steps:

a.From the task bar, select Start > Programs > ZebraNet Utilities > ZebraNet Alert.

Important • The SNMP trap settings must be established to communicate with 10/100 Internal PS if messages are sent to the ZebraNet Alert.

b.In the ZebraNet Alert dialog, from the menu bar, select View > Filter Settings.

c.From the View Filter - Devices tab, choose your settings accordingly.

Note • If you select No device filtering, messages from every printer are caught;

Device Address allows you to specify from which IP address data will come.

d.The View Filter - Events tab allows you to select individual events you want the program to be aware of.

.

Important • Now SNMP Alert messages for the 10/100 Internal PS can be set up in WebView. From the printer’s home page, activate the link to Alert Setup. You can add messages that are sent to the ZebraNet Alert for Windows by choosing SNMP as a destination.

04/19/2007 ZebraNet® 10/100 Internal Print Server for ZM400 and ZM600 User Guide 14197L-001 Rev. A