Zebra Technologies ZM400TM, ZM600TM H/W address, Serial #, Compare the, MAC Address, H/W Address, From the task bar, select, Figure 13 • ZebraNet View, The ZebraNet View dialog opens:

42Getting Started Assigning an IP Address

Assigning an IP Address with DHCP

To assign an IP address using ZebraNet View, complete these steps:

1.From the task bar, select Start > Programs > ZebraNet Utilities > ZebraNet View.

Important • On the illustration that follows, take note of the H/W address column and Serial # column. Compare what you see in ZebraNet View with the network configuration label you printed out.

The ZebraNet View dialog opens:

Figure 13 • ZebraNet View

2.Compare the MAC Address on the 10/100 Internal PS network configuration label with the H/W Address column on the screen to find the 10/100 Internal PS you are working with.

3.When you locate your 10/100 Internal PS, select it.

4.From the menu bar, select PrintServer > Configuration.

Important • If the 10/100 Internal PS does not have an IP address, it shows in the main screen with an IP of 0.0.0.0. If, after 2 minutes, you do not assign an IP Address, the 10/100 Internal PS defaults to IP Address 192.168.254.254.

5.If your 10/100 Internal PS does not have an IP address, complete these steps:

•Find your 10/100 Internal PS and right-click.

•In the small dialog that opens, enter an IP Address, click OK.

•The ZebraNet View dialog opens.

14197L-001 Rev. A ZebraNet® 10/100 Internal Print Server for ZM400 and ZM600 User Guide 04/19/2007