Zebra Technologies ZM400TM, ZM600TM Figure 30 • Primary/Secondary Settings Page

70ZebraLink WebView WebView

Figure 30 • Primary/Secondary Settings Page

5.If you wish to load network settings from the external print server, click YES.

6.To change the primary network, click on the Primary Network drop-down. Select either Wired or Wireless print server as your primary network.

Table 6 outlines priorities and identifies which device becomes the active print server when multiple print servers are installed.

7.Click Submit Changes to apply your changes or click Reset Changes to revert back to previous settings.

Figure 31 opens to confirm your settings have been temporarily saved.

14197L-001 Rev. A ZebraNet® 10/100 Internal Print Server for ZM400 and ZM600 User Guide 04/19/2007