Zenith DSV-110 manual Remote control

Pointer mode (see section 7.2.5)

In pointer mode you can move a pointer cursor on the screen by using the mouse function.

Blank mode (see section 7.2.5)

In blank mode the screen is blanked out (black).

6.2 Remote control

The remote control has two purposes:

1.To access the Main Menu and control the various image adjustments and utility functions of the projector

2.To allow remote control of your computer

Point the remote control towards the projec- tion screen. An infra-red beam bounces from the screen to an infra-red receiver on the pro- jector.

Note!

Make sure nothing is blocking the IR receiver in front of projector located beside the lens, as this will prevent the communication between the remote con- trol and the projector.

To ensure smooth operation, the combined distance from the remote control to the screen and back to the projector should not exceed 33 feet (10 m). If the distance via the screen is longer, you should point the remote control directly towards the IR receiver.

The remote control works with Microsoft Windows, for interactive control of your comput- er. A unique pressure-sensing pad on the remote makes it very easy to control the com-

	MENU
ON
ZAP	QUICK
1
	OFF
	ZAP
	2

Figure 9: Remote control

puter and to perform the same operations as you would with a normal mouse.

The Remote control is very easy to operate. It has only six keys in addition to the pressure sensing mouse pad.

The six keys are:

Key underneath the control

Left mouse key

Small gray key

Interrupt/break an action (right mouse key)

Menu

The menu key gives access to the menu control functions. To move within the various menu functions, position the arrow cursor by press- ing the sensitive mouse pad and click with the left mouse button which is located underneath the remote control.

If you are in menu mode and press the menu key you will return to normal mode.

Zap

The two zap keys can be programmed to per- form an assigned function. To assign a func-

tion to the zap keys, select the Zap icon from the menu. The zap keys can be programmed to do the same function e.g. volume up/down.

See section 7.2.5 for further explanations of the zap menu.

Quick

When pressing the Quick key you can switch between all selected functions for the Quick key. See section 7.2.4. for how to select func- tions for the Quick key.

1 6 1 7