Zenith DSV-110 manual Mouse system

7.2.2 Language

Language selection

This menu allows you to choose between six different menu languages: English, French, German, Italian, Spanish and Norwegian.

Click in the box next to the language you want to use. Click on the OK button. The window will disappear, and the selected language will be used in the main menu and in all other menus.

7.2.3 Mouse system

Mouse system selection

USB will be selected automatically when the mouse cable is connected. If your PC uses RS232 mouse, you must choose MS Serial Mouse in this menu. If your PC uses PS/2 mouse, you must choose PS/2 in the menu. Selected system will be active until another system is chosen. When shipped the projector is set up to PS/2.

7.2.4 Quick menu

Quick menu settings

In the quick menu you can assign functionality for the quick key on the remote control. When clicking on the quick key you will be able to switch between all the functions you have

selected in this menu. In this example, the first time you click on the quick key you will activate the volume function. A volume bar will be dis- played at the bottom of the projected image where you can adjust the volume up and down. You adjust the bar by either pressing the pressure-sensing pad right or left or you may use one of the two zap keys on the remote control. To accept the adjustment, and terminate the quick menus click on the left mouse button. To get back to the original vol- ume, click on the right mouse button.

The next click on the quick key will accept the volume adjustment and activate the brightness function and a brightness bar will be shown at the bottom of the page. When you have gone through all assigned functions the menu will disappear.

7.2.5 Zap menu

Zap menu

The Zap menu is used to assign functions to the zap keys on the remote control. The menu consists of two columns of buttons where the left column assigns the functions to the left key and the right column assigns the functions to the right key.

Note:

Un-selecting all boxes for Zap 1 assigns the “Zap 1’ button on the remote to Power-up the projector from stand-by mode.

Un-selecting all boxes for Zap 2 assigns the “Zap 2” button on the remote to function as the Power-down (stand-by) button.

Volume (+/-)

Controls the sound of active source.

TV channel

Controls the preprogrammed TV channel assignments. If a TV tuner is installed and selected as source you can select a TV channel by using the zap keys.

Pointer

You can activate the pointer function in the projector. One click activates the pointer and the next click deactivates it.

Blank

Activates blank mode by pressing the Zap key. First click will activate Blank mode and second click will deactivate it.

Mute

Turns the sound off. First click will turn off the sound and second click will turn it on.

Computer

Selects Computer as the source.

Video

Selects video sources. Both Zap keys can be programmed to select Video.

Tuner (only when TV tuner is installed)

Select TV-tuner as source.

7.2.6 Show accumulated lamp time

2 2 2 2 2 3 2 3