Adding/Deleting Channels with Manual Program

1.Press the menu button and then use D / E button to select the Channel menu.

2.Press the G and then use D/ E button to select Manual prog..

3.Press the G and then use D/ E button to select Channel.

4.Press the G and then use D/ E button to select the channel number you want to memorize or erase.

5.Press the F button and then use D/ E button to select Memory.

6.Press the G and then use D/ E button to select On or Off.

7.Press the F button and then use D/ E button to select Ch.name. You can make a channel name.

8.Press the G and then use F/G button to select a word position and then D/ E button to enter alphabet A to Z, a to z, number 0 to 9 and blank.

9.Repeat process 3 to 8 to memorize or erase another channels. 10.Press the exit button to return to TV viewing.

Channel

CH.

{

 

EZ Scan

 

Manual prog. { To set

{

Favorite ch.

{

 

+Move {Next+}Back

Manual program

 

Channel

{

TV02

Memory

{

 

Fine

{

 

Ch.name

{

 

Booster

{

 

+Move {Next+}Back

Tuning Channels

Use the ch D / E button to easily select the next higher or lower channel. Or, use the NUMBER buttons to directly select the desired channel.

Adjusting the Sound Level

Use the vol D button to increase the volume level or vol E button to decrease the volume level.

If you press the mute button on the remote control once, the sound is reduce to the half level of original volume level. When pressing the mute button on the remote control again, the sound is muted. At this time, the word Mute is displayed.

Using Mute is convenient if you need to answer a telephone call.

To restore the muted sound, press the mute button on the remote control again or vol D/E button again.

Volume 5

EEEMute

11

Page 11
Image 11
Zenith R40W46 warranty Tuning Channels, Adjusting the Sound Level