Zenith R40W46 Color Convergence Adjustment, Auto Convergence Adjustment R50W46 and R57W46 only

Color Convergence Adjustment

(R40W46, R40W46F, R45W46, R45W46F only)

Use this function to adjust the R-G-B color convergence while a stable signal is being received. When the TV is first installed or if it is relocated, the picture may be unstable with three color ghosts (red, green, blue). This problem can be solved by adjusting the color convergence.

1.Press the menu button and then use D / E button to select the Picture menu.

2.Press the G and then use D/ E button to select Convergence.

3.Press the G and then use D / E button to select 1 (all point convergence) or 9 (9 point convergence) .

If the + display is not white and shows three color ghosts, the color convergence needs to be adjusted. If the + display is white, color convergence does not need to be adjusted.

4.Press the G and then press the tv/video button.

The display button is selected in red or blue.

5.Only selecting 9 : Use the number (0~9) button to select the position your want to adjust the convergence.

6.Use the D / E / F / G button to superimpose the + display (red or blue) over the green +. It will be changed to yellow or cyan.

7.When both red and blue + display is superimposed over green, the + display changes to white.

8.Press the exit button to return to TV viewing.

	Picture
CH.	EZ Video	{
	DRP	{
	Cinema	{
	VM	{
	ACC	{
	Contrast	{
	Brightness	{
	Color	{
	Sharpness	{	1	{
	Tint	{
	Convergence { 9			{
+Move {Next+}Back

TV/ VIDEO ENTER MENU

Note: If the picture needs to be adjusted more 1 (all point convergence) adjustment, you can adjust the 9 (9 point convergence) for the position you want to adjust.

Auto Convergence Adjustment (R50W46 and R57W46 only)

When the TV is first installed or relocated, the picture may be unstable and have three color ghosts (red, green, blue). This problem can be solved with Auto Convergence. This function can adjust the picture color convergence automatically if the TV is receiving a stable signal.

1.Press the menu button and then use D / E button to select the Picture menu.

2.Press the G and then use D/ E button to select Convergence.

3.Press the G button to start auto convergence.

The color convergence order will be: blue, green, then red. The auto convergence function takes about 60 seconds.

Notes: • Wait 20 minutes after turning on the TV before using Auto Convergence.

• Darken the room before adjusting color convergence.

	Picture
CH.	EZ Video	{
	DRP	{
	Cinema	{
	VM	{
	ACC	{
	Contrast	{
	Brightness	{
	Color	{
	Sharpness	{
	Tint	{	To start
	Convergence	{
+Move {Next+}Back

19