English

4. For safe operation

engine, hold it firmly in place so as to ensure that nor the throttle may not come into contact with any obstacles when the engine starts up.

Never place the throttle into the high speed position when starting the engine.

After starting up the engine, check to make sure that the drills stop rotating when the throttle is moved fully back to its original position. If the drills continue to rotate even after the throttle has been moved fully back, turn off the engine and take the unit to your authorized Red Max servicing dealer for repair.

AVOID NOISE PROBLEM

NOTE

Check and follow the local regulations as to sound level and hours of operations for portable gas drill.

In general, operate portable gas drill between 8a.m.and 5p.m.on week days and 9a.m.to 5p.m.weekends. Avoid using portable gas drill late at night and/or early in the morning.

THINGS TO BE CAREFUL ABOUT WHEN USING YOUR PORTABLE GAS DRILL

When using your portable gas drill, grip the handles of the portable gas drill firmly with both hands, place your feet slightly apart (slightly further apart than the width of your shoulders) so that your weight is distributed evenly across both legs, and always be sure to maintain a steady, even posture while working.

Maintain the speed of the engine at the level required to perform drilling work, and never raise the speed of the engine above the level necessary.

Always be sure never to allow other persons to come within the work area while drilling.

Be especially careful not to slip if it is raining or if rain has just stopped, as the ground is likely to be slippery at such times.

If the grass or other object gets caught in the drill during operation, always be sure to turn off the engine before removing the object.

Guard against hazardous situations at all times. Warn adults to keep pets and children away from the area. Establish a safe method for gaining your attention during operation. Be careful if you are approached.

If someone calls out or otherwise interrupts you while working, always be sure to turn off the engine before turning around.

14

Page 14
Image 14
Zenoah EDG2300R manual Avoid Noise Problem