5. For safe operation
1.Read this manual carefully until you completely understand and follow all safety and operating instructions.
2. Keep this manual handy so that you may refer to it later when- ever any questions arise. Also note, if you have any questions which cannot be answered herein, contact the dealer from whom you purchased the prod- uct.
3. Always be sure to include this manual when selling, lending, or otherwise transferring the own- ership of this product.
4.Never allow children or anyone unable to fully understand the directions given in the manual to use the machine.
WORKING CONDITION
1. When using the product, you should wear proper clothing and protective equipment.
(1) Helmet
(2) Ear protectors
(3) Protection goggles or face protector
(4)Thick work gloves
(5)
2.And you should carry with you.
(1)Attached tools
(2)Properly reserved fuel
(3)Spare blade
(4)Things to notify your working area (rope, warning signs)
(5)Whistle (for collaboration or emergency)
(6)Hatchet or saw (for removal of obstacles)
3. Do not wear loose clothing, jew- elry, short trousers, sandals, or go barefoot. Do not wear anything which might be caught by a mov- ing part of the unit. Secure hair so it is above shoulder length.
WORKING CIRCUMSTANCE
1. Never start the engine inside a closed room or building. Exhaust gases contain dangerous carbon monoxide.
2.Never use the product,
a.when the ground is slippery or when you can’t maintain a steady posture.
EXZ2610DL
b.At night, at times of heavy fog, or at any other times when
your field of vision might be limited and it would be diffi- cult to gain a clear view of the working area.
c. During rain storms, during lightning storms, at times of strong or
WORKING PLAN
1. You should never use the prod- uct when under the influence of alcohol, when suffering from ex- haustion or lack of sleep, when suffering from drowsiness as a re- sult of having taken cold medicine or at any other time when a pos- sibility exists that your judgment might be impaired or that you might not be able to operate the product properly and in a safe manner.
2. When planning your work sched- ule, allow plenty of time to rest. Limit the amount of time over which the product is to be used continuously to somewhere around 30 ~ 40 minutes per ses- sion, and take 10 ~ 20 minutes of rest between work sessions. Also try to keep the total amount of work performed in a single day under 2 hours or less.
WARNING
1. If you don’t observe the working time, or working manner (See “USING THE PRODUCT”), Re- petitive Stress Injury (RSI) could occur.
If you feel discomfort, redness and swelling of your fingers or any other part of your body, see a doc- tor before getting worse.
2.To avoid noise complaints, in gen- eral, operate product between 8 a.m. and 5 p.m. on weekdays and 9 a.m. to 5 p.m. on weekends.
NOTE
Check and follow the local regula- tions as to sound level and hours of operations for the product.
G B
