Zenoah EXZ2610DL 1 ~ 2 mm, Adjusting Throttle Cable, Adjusting Idling Speed, Operation

EXZ2610DL

8. Operation

ADJUSTING THROTTLE CABLE

•The normal play is 1 or 2 mm when measured at the carburetor side end. Readjust with the cable adjuster as required.

1 ~ 2 mm

(1) Cable adjuster

(1)

ADJUSTING IDLING SPEED

(1)

(1)Idle adjusting screw

1.When the engine tends to stop frequently at idling mode, turn the adjusting screw clockwise.

2.When the cutting head keeps rotating after releasing the trigger, turn the adjusting screw counter-clockwise.

NOTE

• Warm up the engine before adjusting the idling speed.

GB-18