Zenoah EXZ2610DL owner manual Operation, Adjusting Handle Position, Adjusting Wheel Height

EXZ2610DL

8. Operation

STARTING ENGINE (HE-EX only)

The ZENOAH stick edger is designed for edging lawn in gardens, parks, roadsides and so on.

Before starting the engine, take the operating position and adjust the handle position and the wheel height as necessary.

ADJUSTING HANDLE POSITION

•Loosen the handle bracket screws and re-position the handle to your best operating position. Re-tighten the screws.

WARNING

The cutting head will start rotating upon the engine starts.

1.Feed fuel into the fuel tank and tighten the cap se- curely.

(1)

(PS-EX only) Feed the chain oil into the oil tank and tighten the cap securely, too.

(2)

ADJUSTING WHEEL HEIGHT

•Loosen the clamp lever and change the wheel height to obtain desired cutting depth.

(1) Fuel (2) Chain oil

2.Rest the unit on a flat, firm place. Keep the cutting head off the ground and clear of surrounding objects, as it will start rotating upon starting of the engine.

3.Push the primer several times until overflown fuel flows out in the clear tube.

(1) Deep cut (2) Shallow cut

WARNING

Never adjust wheel height with the engine running.

4. Move the choke lever to the closed position.

(1)

(2)

(3)

(1) Choke lever (2) Close (3) Open

GB-16