Hardware Installation and PC Setup
192.168.1.254 in the IP Address field and 255.255.255.0 in the Subnet Mask field.
13Click on OK twice to confirm and save your changes, and then close the Control Panel.
Windows 95 and Windows 98
1In the Windows task bar, click on the Start button, point to Settings, and then click on Control Panel.
2
The Network dialog box displays a list of currently installed network components. If the list includes TCP/IP, the protocol has already been enabled. Skip to step 9.
3If TCP/IP does not appear as an installed component, click on Add. The Select Network Component Type dialog box appears.
4Select Protocol, and then click on Add.
The Select Network Protocol dialog box appears.
5Click on Microsoft in the Manufacturers list box, and then click on TCP/ IP in the Network Protocols list box.
6Click on OK to return to the Network dialog box, and then click on OK again.
You may be prompted to install files from your Windows 95/98 installation CD. Follow the instructions to install the files.
7Click on OK to restart the PC and complete the TCP/IP installation.
8After restarting your PC, open the Control Panel window, and then click on the Network icon.
9Select the network component labeled TCP/IP, and then click on Properties.
If you have multiple TCP/IP listings, select the listing associated with your network card or adapter.
10In the TCP/IP Properties dialog box, click on the IP Address tab.
11Click in the radio button labeled Use the following IP address. Type an address between 192.168.1.3 and 192.168.1.254 in the IP Address field and 255.255.255.0 in the Subnet Mask field.
12Click on OK twice to confirm and save your changes. You will be prompted to restart Windows. Click on Yes.
Windows NT 4.0
1In the Windows NT task bar, click on the Start button, point to Settings, and then click on Control Panel.
2In the Control Panel window, double click on the Network icon.
24 |
|
