4 Click Installation Wizard.

5 Click ADSL X5 Modem to start the software installation, then click Next when prompted.

6 When the installation is complete, click Finish, then click

Exit.

7 Close any applications that may be open, then remove the CD from the CD-ROM drive.

8 Shut down the computer.

Congratulations! You have installed the software. Now, continue with the next section, Installing the Hardware.

Step 2: Installing the Hardware

Windows users only: Be sure that you have already installed the software BEFORE beginning this section. Software installation is not required for Macintosh and Linux computers.

1 Shut down your computer (if it is not shut down already).

!For Windows users, this is the computer on which you just installed the software.

!For Macintosh or Linux users, this can be any one of the computers that you plan to plug directly into the X5. If you plan to use a network device (such as a wireless access point, router, hub, or switch) you must connect at least one of your computers directly to the modem.

10

ADSL X5 User's Guide