Appendix B

Front and Back Panels

The front panel of the X5 looks like this:

The following table describes each light on the front panel.

Light

Description

PWR

Lights when the X5 is plugged into a power source.

LAN 1 Each lights when the corresponding LAN port of the X5 is plugged into the Ethernet port of a powered-up device. Blinks

2 when data is sent.

3

4

USB Lights when the USB port of the X5 is plugged into the USB port of a powered-up device. Blinks when data is sent.

ADSL Blinks when the X5 is performing its startup sequence. Stays

on solid when the unit has synched up with its ADSL connection.

Note: If the light fails to switch from blinking to steady after a minute or two, check with your ADSL provider that the ADSL connection is activated, or refer to Appendix D:

Troubleshooting on page 57.

48

ADSL X5 User’s Guide