6 Click Save Changes and then Write Settings to Flash. Once the process is complete, the X5’s ADSL light should remain on steady (this should take about 15 seconds).

7 Verify that your Internet connection is working. Open your Web browser (e.g., Internet Explorer or Netscape Navigator) and try to connect to a familiar Web address.

If you connect successfully, you are ready to browse the Web from this computer!

Congratulations! You have established communication and your computer is now connected to the Internet. If you want to connect more computers or a network device to the X5, continue with Connecting Additional Computers to the Internet on page 24. Otherwise, you are done with this user’s guide. Enjoy your X5!

If You Did Not Connect

If you did not connect and you are using settings provided by your service provider, repeat steps 3–7 above and make sure that you enter the information correctly (especially your Username and Password, if your Encapsulation begins with PPP). If you still cannot connect, look up your provider in the ADSL Internet Settings Tables on page 45 and try the setting(s) shown, if different.

If you did not connect and were using settings from the ADSL Internet Settings Tables, return to the tables and find the next most frequently used settings—those labeled (2) if you just entered (1), or (3) if you just entered (2), and repeat steps 3–7 above.

Chapter 1: Installation Instructions

21