Chapter 38 System Remote Management

38.10.4.1 Dial-in Management Command Examples

The following commands show you how to set up dial-in management with the following parameters: active, port speed 57600, initial-string ATDT, and description “I am dial-in management”.

Router# configure terminal

Router(config)# dial-in

Router(config-dial-in)# activate

Router(config-dial-in)# port-speed 57600

Router(config-dial-in)# initial-string ATDT

Router(config-dial-in)# description I am dial-in management

Router(config-dial-in)# exit

38.11 Vantage CNM

Vantage CNM (Centralized Network Management) is a browser-based global management solution that allows an administrator from any location to easily configure, manage, monitor and troubleshoot ZyXEL devices located worldwide. See the Vantage CNM User's Guide for details.

If you allow your ZyWALL to be managed by the Vantage CNM server, then you should not do any configurations directly to the ZyWALL (using either the web configurator or commands) without notifying the Vantage CNM administrator.

38.11.1 Vantage CNM Commands

The following table describes the commands available for dial-in management. You must use the configure terminal command to enter the configuration mode before you can use these commands.

Table 179 Command Summary: Vantage CNM

COMMAND

DESCRIPTION

[no] cnm-agent manager url

Sets up the URL of the Vantage server that the ZyWALL registers with. Include the full

 

HTTPS or HTTP URL. For example, https://1.2.3.4/vantage/TR069.

[no] cnm-agent activate

Turns management through Vantage CNM on or off.

cnm-agent keepalive interval

Sets the keepalive interval.

<10..90>

 

[no] cnm-agent periodic-inform

Turns the periodic inform on or off.

activate

 

cnm-agent periodic-inform

Sets the periodic inform interval.

interval <10..86400>

 

cnm-agent trigger-inform

initiates a TR069 connection to the server. You can also specify the interval for the

[interval]

inform messages.

[no] cnm-agent auth activate

Enables or disables authentication of the server when using HTTPS.

show cnm-agent configuration

Displays the Vantage CNM configuration.

[no] cnm-agent acs username

Configure the username of the ACS (Auto-Configuration Server) connection request

<username for ACS connection

for the ZyWALL to authenticate the server using HTTP digest authentication.

request>

No removes the username of the ACS connection request.

 

296

 

ZyWALL (ZLD) CLI Reference Guide