Chapter 6 Interfaces

Table 27 Cellular Interface Commands (continued)

COMMAND

DESCRIPTION

budget percentage {ptimepdata} <0..99>

Sets a percentage (0~99) of time budget (ptime) or data (pdata)

 

limit. When the specified limit is exceeded, the ZyWALL takes the

 

action configured using the budget {log-percentagelog-

 

percentage-alert} command.

budget {log-percentagelog-percentage-

Sets to have the ZyWALL create a log (log-percentage) or an alert

alert} [recursive <1..65535>]

log (log-percentage-alert) when the set percentage of time budget

 

or data limit is exceeded. You can configure the percentage using the

 

budget percentage command.

 

You can also set how often (from 1 to 65535 minutes) to send the log

 

or alert.

 

 

no budget log-percentage

Sets the ZyWALL to not create a log when the set percentage of time

 

budget or data limit is exceeded. You can configure the percentage

 

using the budget percentage command.

connectivity {nail-up dial-on-demand}

Sets the connection to be always on or only when there is traffic.

[no] local-address <ip>

Sets (or clears) the cellular interface’s local (own) IP address.

mtu <576..1492>

Sets the Maximum Transmission Unit in bytes.

[no] pin <pin code>

Sets (or clears) the PIN code for the cellular device’s 3G card. Use 1-

 

4 alphanumeric characters, underscores(_), or dashes (-).

[no] remote-address <ip>

Sets (or clears) the IP address of the cellular interface’s peer (like a

 

gateway or PPPoE server).

 

 

interface cellular budget-auto-save

Sets how often (in minutes) the ZyWALL saves time and data usage

<5..1440>

records for a connection using the 3G card.

show interface cellular [corresponding-

Shows the status of the specified cellular interface.

slotdevice-statussupport-device]

 

show interface cellular corresponding-slot

Shows which cellular interface is on which slot and whether which

 

cellular interface has been configured.

 

 

show interface cellular device-status

Displays the installed SIM card and 3G card status.

show interface cellular support-device

Displays all 3G card models the ZyWALL can support.

show interface cellular budget-auto-save

Displays how often (in minutes) the ZyWALL records time and data

 

usage of your 3G budgets.

show interface cellular status

Displays the traffic statistics and connection status for your cellular

 

interfaces. See Section 6.6.1 on page 78 for all possible cellular status

 

descriptions.

 

 

show interface interface_name [budget]

Displays the budget control settings for the specified cellular

 

interface.

show interface interface_name device status

Displays the 3G card and SIM card information for the specified

 

cellular interface.

 

 

show interface interface_name device

Displays the 3G connection profile settings of the specified cellular

profile

interface.

6.6.1 Cellular Status

The following table describes the different kinds of cellular connection status on the ZyWALL.

Table 28 Cellular Status

STATUS

DESCRIPTION

No device

no 3G device is connected to the ZyWALL.

 

 

No service

no 3G network is available in the area; you cannot connect to the Internet.

 

 

78

 

ZyWALL (ZLD) CLI Reference Guide