Current Operating Modes: |
|
|
| ||
Data Mode: ATM | Service Type in operation: G.DMT |
| |||
Number of Channels (Down/up stream): 1/1 |
| ||||
Downstream Framing Structure |
| : 3 |
| ||
Active down/up stream rate option |
| : 1/1 |
| ||
TRELLIS operation mode is |
| : ON |
| ||
Current Connection detail: |
|
|
| ||
Down/up stream interleaved Delay : 4/ 4 ms |
| ||||
Downstream Parity byte assigned to fast/interleaved : 0/ 2 | |||||
Upstream | Parity byte assigned to fast/interleaved : 0/ 2 | ||||
Downstream Symbols assigned to fast/interleaved | : 0/ 1 | ||||
Upstream | Symbols assigned to fast/interleaved | : 0/ 1 | |||
Down/up stream Depth value | : | 2/ 2 |
| ||
Total Transceiver Output Power | : | 8dB |
| ||
Current ATUR Information: |
|
|
| ||
Country code 0 |
|
|
|
| |
Provider Code 01020304 |
|
|
| ||
Capabilities: |
|
|
|
| |
g.dmt | POTS overlap (Annex A) |
|
|
| |
The results contain the operating modes, interleave delay, parity byte assignment, parity bytes per codeword, symbols per codeword and interleave depth. Current ATUR Information contains data acquired from the ATUR (stands for ADSL Termination Unit – Remote, in this case the user’s ADSL modem or router) during negotiation/provisioning message interchanges. It includes the Vendor ID and Version Number obtained from Vendor ID fields (g.994.1) or
Information obtained prior to training to steady state transition will not be valid or will be old information.
5.5.8Lineperf Command
Syntax:
192.168.1.1 adsl> lineperf <port number>
where
<port number> = port number, from 1 to 8
The lineperf command shows the line performance counters of an ADSL port. An example is shown next.
192.168.1.1 adsl> lineperf 7
ADSL Configuration |