5.5.21 Set PVC Command
Syntax:
192.168.1.1 adsl> set pvc <port number> <multiplexing mode> <tx vpi> <tx vci> [<rx vpi> <rx vci>]
where |
|
<port number> = | port number, from 1 to 8. |
<multiplexing mode> = | either “llc” or “vc" |
<tx vpi> = | the VPI setting of the ADSL port for use with a TX based network |
<tx vci> = | the VCI setting for the ADSL port for use with a TX based network |
<rx vpi> = | the VPI setting for the ADSL port for use with Rx based networks |
<rx vci> = | the VCI setting for the ADSL port for use with Rx based networks |
The | <rx vpi> and | <rx vci> settings will be equal to those of <tx vpi> and <tx vci> if the rx settings |
are not configured. |
| |
The | set pvc command allows the configuration of a PVC (permanent virtual circuit) for an individual ADSL | |
port. |
| |
5.5.22 Set PVCs Command | ||
Syntax: |
| |
| 192.168.1.1 adsl> set pvcs <multiplexing mode> <tx vpi> <tx vci> [<rx vpi> <rx | |
| vci>] |
|
where |
| |
| <multiplexing mode> = either “llc” or “vc” | |
| <tx vpi> = | the VPI setting of the ADSL ports for use with a TX based network |
| <tx vci> = | the VCI setting for the ADSL ports for use with a TX based network |
| <rx vpi> = | the VPI setting for the ADSL ports for use with Rx based networks |
| <rx vpi> = | the VCI setting for the ADSL ports for use with Rx based networks |
The | <rx vpi> and | <rx vci> settings will be equal to those of <tx vpi> and <tx vci> if the rx settings |
are not configured. |
| |
The set pvcs command allows you to configure a single PVC for all of the ADSL ports at once.
5.5.23 Show PVC Command
Syntax:
192.168.1.1 adsl> show pvc <port number>
where
<port number> = port number, from 1 to 8.
The show pvc command allows you to display the PVC parameters of an individual ADSL port.
ADSL Configuration |