8.5.9DVLAN List Command
Syntax:
192.168.1.1 vlan1q> dvlan list
This command displays the dynamic VLAN registration table. The following figure is an example of what is displayed when you use this command.
vid | 01 | 02 | 03 | 04 | 05 | 06 | 07 | 08 | 09 |
2 | >> | >> | >> | >> | |||||
3 | >> | >> | >> | >> | >> | ||||
4 | >> | >> | >> | >> | >> | ||||
5 | >> | >> | >> | >> | |||||
6 | >> | >> | >> | >> | >> | ||||
7 | >> | >> | >> | >> | >> | ||||
8 | >> | >> | >> | >> | >> | >> | |||
9 | >> | >> | >> | >> |
In the figure above, “” denotes “filter” and “>>” denotes “forward”.
8.5.10 DVLAN Getentry Command
Syntax:
192.168.1.1 vlan1q> dvlan getentry <vid>
where |
|
|
<vid> | = | VLAN ID. Valid parameter range = [1 – 4094]. |
This command displays an entry with a specified VLAN ID in dynamic GVRP table.
Display a Dynamic VLAN Table Entry Example
The following figure is an example display of the following command.
192.168.1.1 vlan1q> dvlan getentry 2
vid | 01 | 02 | 03 | 04 | 05 | 06 | 07 | 08 | 09 |
2 | >> | >> | >> | >> |
In the figure above, “” denotes “filter” and “>>” denotes “forward”.
8.5.11 VLAN List Command
Syntax:
192.168.1.1 vlan1q> vlan list
This command displays the entire VLAN table. The display refreshes periodically. Press [ENTER] and then enter the stop command to stop the display from refreshing. The following figure is an example what is displayed when you use this command.
IEEE 802.1Q Tagged VLAN Commands |