♦overheatOver Trap (defined in
This trap is sent periodically when the ADSL Networking Module is no longer overheated.
11.4.2 Trap Add Command
Syntax:
192.168.1.1 snmp> trap add <community> <IP addr> [<port>]
where |
|
<community> = | The password used by the ADSL Networking Module to authenticate itself |
| to the trap server. |
<IP addr> = | The IP address of the trap server. |
[<Port>] = | The optional port parameter is for specifying the UDP port number on the |
| server in case it is different from the default of port 162. |
This command adds a trap server.
11.4.3 Trap Delete Command
Syntax:
192.168.1.1 snmp> trap delete <community> <IP addr> [<port>]
This command deletes a trap destination. The parameters are the same as the trap add command.
11.4.4 Trap Flush Command
Syntax:
192.168.1.1 snmp> trap flush
This command deletes all trap destinations.
11.4.5 Trap List Command
Syntax:
192.168.1.1 snmp> trap list
This command lists all the trap destinations.
Remote Management |